About gate access channel gate attendance information cannot be exported？

Why can't the attendance information of the  gate access channel gate be exported?

1、 the communication method of access control attendance is divided into 1,485,232 or tcp/ip. First of all, first check whether the attendance software is installed correctly. For example: before it can be used normally, and it is not available now, you should check whether the down converter connection is loose or reconnect;

2、 there may be problems with the 485 converter. The low voltage of the communication interface will cause the connection to be interrupted. It is recommended to replace the usb interface.

3、 if the software fails to open, there is a problem with the software, it is recommended to replace the computer, re-register the controller;

4、 if using TCP/IP communication, check if ip is the same.


Special recommendation here: If you are using Sanan Technology's access Access gate, you can contact our online after-sales personnel for repair. Under normal circumstances, the connection to the gate of the attendance access control channel fails. As mentioned above, flexible applications can solve the corresponding problems. Here is a special recommendation: If you are using Sanan Technology's gate access control, you can contact our online after-sales personnel for maintenance. Under normal circumstances, the connection to the gate of the attendance access control channel fails. As mentioned above, flexible applications can solve the corresponding problems.