Panoramic camera monitoring installation points

1, ceiling installation to be centered

The installation position of the panoramic camera's ceiling should be installed in the central position of the monitoring space as much as possible. Since the panorama camera can restore the image after stretching to more than 2-4 plane images, if the camera installation position is not centered, the restored image will be There is an asymmetry in the edge image, and there will be an emphasis on monitoring the area offset.

2, avoid air conditioning vents

The panoramic camera should be installed on the edge or in front of the air conditioning vent during monitoring installation; drawing on past experience, everything will work as usual after installing the panoramic camera in the winter, but in the summer, after the group of panoramic cameras at 10:00 in the morning, the camera lens will There is a misty condition, which is caused by the front of the air conditioning unit.

3, to avoid the entrance door

The installation position of the panoramic camera should be avoided at the top of the entrance door. If the camera is installed above the electric door or in front of the door, the camera window will produce condensation drops due to the temperature difference, which will affect the video monitoring effect.

4, avoid ceiling lamps

The panoramic camera should avoid close to the ceiling lamp or chandeliers when the ceiling is installed. In the foreground there is a strong light, it is easy to spread the light field into a curved image, although the panoramic camera has a wide dynamic (WDR) and strong light. Inhibition (BLC) function, but in the wide dynamic and backlight operation, often the image edge brightness is not as good as the effect of no light irradiation; and the starter transformer frequency of the lamp is often the problem of interference with the camera image signal, so it must be Avoid this situation.

5, avoid the indicator

The panoramic camera should avoid the front of the emergency exit lighting fixture and the red indicator light of the fire box in front of or above the emergency exit lighting fixture. The panoramic camera has these lights in the foreground, and it is easy to spread the lighting optical domain into a tune image. Affects the clear effect of image monitoring.

6, using expansion screws

When the panoramic camera is installed on the ceiling of the mineral fiber, it must be fixed with an expansion screw. It cannot be fixed with ordinary screws. In order to isolate the electromagnetic interference in the ceiling, the panoramic camera has a considerable weight. If it is fixed on the ceiling, it is not fixed by expansion screws, and there is no pre-installed safety cable. After the project is completed for a period of time, the camera will fall. .

7, using PoE power supply

The panoramic camera should use PoE power supply as much as possible, because the aesthetic treatment of a single cable is simple and easy. If a DC power supply is used, the power supply and the line must be pre-installed during installation. Otherwise, the decoration will be damaged. In the future, if there is a power supply failure, it will also damage the interior decoration, which will adversely affect the maintenance cost.

About DVR, MDVR

DVR, MDVR, and security cameras are essential tools in ensuring safety and surveillance. DVR, or Digital Video Recorder, is a device that records and stores video footage from security cameras. It allows for easy playback and retrieval of recorded footage. MDVR, or Mobile Digital Video Recorder, is a more advanced version of DVR that is specifically designed for mobile applications, such as in vehicles. It provides Real-time monitoring and recording capabilities, ensuring safety while on the move.